The emergence of water purifiers has ensured the safety of our drinking water and alleviated people’s troubles of tap water pollution. In the process of using water purifiers, there are many things that we cannot predict in our daily lives. For example, we have installed water purifiers but are working on business trips. , Travel, family relocation, etc., various unpredictable factors have caused the water purifier to not be used for a long time. What matters should be paid attention to when restarting it?
1. Flushing water purifier
When restarting to use the water purifier, the water purifier needs to be rinsed. If it is not used for 3 days, rinse it for about 3-5 minutes. If it is more than 10 days or longer, it needs to be rinsed for more than 15 minutes until the residue is left. Rinse all the water.
2. The filter element must be replaced regularly
The filter element used inside the water purifier is different, and the life is different. If the water purifier is not used for a long time (such as more than 6 months or even longer), the filter element will lose its filtering function. At this time, the filter element of the water purifier needs to be cleaned. After the test, whether there is still water purification effect, according to the purification effect to decide whether you need to replace the filter element.
3. flush the filter element of the water purifier
If the water purifier has not been used for more than one month, bacteria will grow inside the filter element of the water purifier. To avoid secondary pollution, the filter elements should be cleaned when the water purifier is used again. If the water quality is poor and the effluent size is different after rinsing, Under the circumstances, it is recommended to backwash the water purifier.
4. open the sewage outlet
Before restarting the water purifier, you need to open the sewage outlet to discharge the mud, sand and rust, so as not to cause the water purifier to be blocked, and the water will not come out or the water will have a peculiar smell.
5. Close the tap water inlet
If the water purifier has not been used for a long time, the tap water inlet valve should be closed to avoid water leakage caused by the faucet falling off due to excessive water pressure, causing unnecessary losses.