If the Big Blue Triple Filtration System BRM03 is not used for a long period of time, some special care and maintenance measures are required to ensure that the system can function properly and provide high-quality filtered water when it is used again. Before stopping use, first let water flow through the system for a period of time to thoroughly remove impurities and sediments inside. Then, drain the water from the system to prevent the water from being stored inside for a long time, which may cause bacteria to grow or the filter element to deteriorate. Remove the filter element from the system and dry it thoroughly or store it in a dry environment to avoid the growth of mold and bacteria. It is best to store the filter element in a sealed dry plastic bag or container to prevent dust and moisture from entering.
Even if the system is not in use, it should be checked regularly to ensure that there is no rust, corrosion or damage, and stored in a place with a suitable temperature to avoid extreme heat or cold that may damage the system components. Before restarting the system, disinfect the system with an appropriate disinfectant (such as a diluted bleach solution) to ensure that all parts are clean and sterile. If it has been out of use for a long time (more than half a year), it is recommended to replace all filter elements before re-use to ensure the filtration effect and water quality safety. Before re-using the system, it is necessary to let water flow through the system for a period of time (usually 5-10 minutes) to remove residual disinfectants and impurities in the system.
In addition, long-term non-use may cause the seals and connectors to age or deform. Before restarting, it is necessary to check and replace necessary parts to prevent water leakage. Through these maintenance and care measures, you can ensure that the Big Blue Triple Filtration System BRM03 still maintains good performance after a long period of non-use and can provide high-quality filtered water.