How to maintain the ultrafiltration water purifier

Ultrafiltration water purifier produces little or no water

If it is the first time that there is no water coming out, and there is water at the water inlet, then the installation sequence of the water pipes is wrong.

Solution: Re-disassemble the water pipe, and then reinstall it in order according to the installation manual of the ultrafiltration water purifier.

If there is no water or the water output drops sharply after a period of use, it is most likely that the water pipe is clogged or the filter element is clogged.

Solution: If the water pipe of the water purifier is blocked, directly remove the blocked part or replace the water pipe; if the filter element is blocked, remove the filter element and replace it with a new one.

Turbid effluent

The important determinant of the water purification effect of a household water purifier is the filter element. If the water quality is poor, the filter element is malfunctioning.

Solution: Take out the filter element in time and clean it. If it is used again, the effluent is still turbid, it means that the service life of the filter element has reached the upper limit, and a new filter element must be replaced.

The sound of water purification is loud

At present, there are many types of water purifiers on the market, such as those that use electricity, those that don't use electricity, and those that are ultra-quiet. If there is a slight noise during the use of the electric water purifier, it is normal, that is, the pressure pump in the water purifier is running. However, if the sound suddenly becomes noisy when the water purifier is in operation, it means that there is a problem with the internal parts of the machine.

Solution: Stop the water purification immediately, disassemble the water purifier to see if the internal parts are damaged, then wipe the dust inside the machine and replace the damaged parts.