How to clean the water dispenser

1. Disconnect the power. Turn off the water dispenser and unplug the power cord.
2. Open the two faucets of the water dispenser and the plug that puts the water on the bottom cover of the water dispenser, completely clean the water in the water dispenser, then close the faucet and plug the stopper. There is only one plug behind the single-temperature water dispenser and the compression-cooled dual-temperature water dispenser, and the electronic cooling dual-temperature water dispenser is followed by two plugs.
3. Pour in white vinegar. After pouring the vinegar into it, open the faucet and let it go. See if there is no vinegar and see the vinegar flowing out, indicating that the liner is filled. The liner must be full, and it will easily burn the liner if it is heated. (One bottle is not enough, you can pour 2 bottles of vinegar)
4. Turn on the power and heat for 40 minutes. After the water dispenser is heated for 40 minutes, disconnect the power supply and open 2 faucets at the same time to release the white vinegar in the water dispenser. When the white vinegar stopped flowing out, the plug of the base was opened again. At this time, it was seen that the white vinegar with yellow brown and impurities was discharged from the plug. If the water dispenser has not been cleaned for a long time, it is recommended to wash it again. Finally, follow the same steps and pour the water for a few more times.
The water dispenser is as follows:
The water dispenser is a device that warms or cools the barrel of purified water (or mineral water) and is convenient for people to drink. Bottled water is placed above the machine for use with the bottled water.
The water dispenser is divided into three types: warm, ice, and ice. The ice heat machine is divided into a semiconductor refrigeration water dispenser and a compressor refrigeration water dispenser.

https://www.penoso.net/